windows XP

Viestiketju Windows -ongelmat -osiossa. Ketjun avasi pappa64 20.02.2013.

  1. pappa64

    pappa64 Member

    Liittynyt:
    28.10.2012
    Viestejä:
    18
    Kiitokset:
    0
    Pisteet:
    11
    Kone on hp compag 6320 on salasana suojattu olen onnellisesti hukannut tunnukset kone ollut muutamanvuoden käyttämättä,nyt tekisin siitä varakoneen mutta ei anna formatoida,mitä voisin tehdä.?
     
  2.  
  3. friis

    friis Active member

    Liittynyt:
    25.02.2004
    Viestejä:
    1,203
    Kiitokset:
    0
    Pisteet:
    66
    Siis windowsin salasana hukassa?
    XP:n salasanan selvittäminen onnistuu esim Ophcrack liveCD/usb:llä.
    http://ophcrack.sourceforge.net/

    ??? miten ei anna formatoida? Jos haluat asentaa windowsin uudestaan niin levy vaan sisään ja asennus käyntiin. Se formatoi levyn uudestaan niin halutessasi.
     
  4. Datanen

    Datanen Guest

    Liittynyt:
    21.09.2010
    Viestejä:
    5,322
    Kiitokset:
    68
    Pisteet:
    108
    Ja jos levyä ei ole mutta palautusosio löytyy niin XP voi asentaa senkin kautta uudestaan vaikka salasanaa ei muista.
     
  5. 1pertti

    1pertti Senior member

    Liittynyt:
    10.09.2008
    Viestejä:
    9,423
    Kiitokset:
    1,274
    Pisteet:
    243
    Eikös tuo ole ns. business-malli? HP:tä en tunne, mutta jos IBM/Lenovo ThinkPadeissa on asetettu BIOSille tai kovalevylle salasana, niin ei sitä noin vain ohiteta edes asentamalla Windows uudelleen. Jos kovalevylle on asetettu salasana ja Administrator-salasanakin on unohtunut, levy menee vaihtoon. Jos BIOS-salasana eli Administrator-password on asetettu ja unohtunut, menee koko emolevy ja kovalevy vaihtoon. Toisin sanoen Administrator-salasanalle ei ole mitään palautusmahdollisuutta edes valmistajan huollossa. Näin turvataan koneella olevat yrityssalaisuudet.
     
  6. friis

    friis Active member

    Liittynyt:
    25.02.2004
    Viestejä:
    1,203
    Kiitokset:
    0
    Pisteet:
    66
    Jos kyseessä on BIOS salasana niin kokeile tuota -->
    http://h30499.www3.hp.com/t5/general/NC6320-BIOS-Password-Reset-Please-Help/td-p/3981335
    1.) Flip the Laptop over and unscrew the very center plate and remove it. There is only 1 screw.

    2.) You will then see two screws near the back corners with keyboard logos on the laptop pointing to them. Unscrew them and remove them.

    3.) Flip the laptop back over and open it. You will see 4 small tabs that sorta look like slivers of keys in between: Esc and F1, F4 and F5, F8 and F9, F12 and Delete. Slide these toward you, they should move about an 8th of an inch. Then you should be able to lift the top of the keyboard up and out and there will still be a cable attached so let it lay upside down on the mouse pad.

    4.) You will see a battery to the lower left of where the keyboard use to be. A small 3/4 inch round style plugged into the board. Unplug the connecter from the mother board and wait about 30 seconds and plug it back in.

    5.) Slide the keyboard back in, it has tabs on the bottom that slide down in first then push the top of the keyboard down and slide those moveable tabs back up into the slots.

    6.) Plug the AC cable back in but DO NOT put they Main Laptop Battery back in. Turn on the laptop and press F10 when the load screen comes up. It should let you in with no password prompt. Create a new password or do not set one and Save and Exit and then hold the power button down when it reboots to turn it back off. Screw the 2 keyboard screws back into the bottom and slide the center plate back down in and screw it in. Put the main Laptop Battery back in and turn it on and you will be good to go.

     

Jaa tämä sivu