Poltto-ongelma...

Elikkä en pysty polttamaan tavallista avia CD:lle, kun josaain 4% kohdalla saan virheviestin [bold]Calibration area full[/bold]. Poltto loppuu siihen ja seuraa oheiset viestit:
[bold]Invalid write state
Could not perform EndTrack
Command sequence error
Could not perform fixation
Command sequance error
Could not perform fixation
Burning process failed at 1x (150 KB/s).[/bold]

Polttava asema: HP CD-Writer Plus 7200 series
CD levy: Maxell CD-R 80XL-S 700MB
Poltto ohjelma: Nero 5.5.9.14

Audio cd:t se polttaa ilman ongelmia samoin data, jossa ei ole avia. Olen yrittänyt uudemmalla Nerolla (6.6.0.6), ongelma ei poistunut. Yritin No multisession asetuksella ja Multisession asetuksella kummallakin Disc-at-once ja track-at-once ja eri nopeuksilla. Myöskin eri CD:ille oon kokeillu mm. Sony,TDK.

Tässä vielä Neron antama virheviesti:

Tietokone

15037-23320-44564-05933-5539

Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.00c2 (970), size=21504 bytes, created 16.5.1996 9:00:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 25.6.2002 17:34:54
Nero Version: 5.5.9.14
Recorder: <HP CD-Writer+ 7200> Version: 3.01 - HA 1 TA 0 - 5.5.9.14
Adapter driver: <atapi> HA 1
Drive buffer : 768kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TEAC CD-532E-A> Version: 2.0C - HA 0 TA 1 - 5.5.9.14
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : TEAC CD-532E-A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP CD-Writer+ 7200 atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260528kB)
Free physical memory: 54MB (56036kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

26.1.2005
CD-ROM (ISO)
21:59:03 #1 Text 0 File Isodoc.cpp, Line 6887
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

21:59:04 #2 Text 0 File Reader.cpp, Line 118
Reader running

21:59:04 #3 Text 0 File Writer.cpp, Line 127
Writer HP CD-Writer+ 7200 running

21:59:04 #4 ISO9660GEN -11 File geniso.cpp, Line 4484
First writeable address = 0 (0x00000000)

21:59:04 #5 Text 0 File Burncd.cpp, Line 3588
Turn on Track-At-Once, using CD-R/RW media

21:59:04 #6 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 332859 (332859) = #332859/73:58.9
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

21:59:11 #7 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 332858 (74:00.08)

21:59:11 #8 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

21:59:12 #9 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: HP CD-Writer+ 7200;
CDRW code: 00 97 15 15; OSJ entry from: Ritek Co.
ATIP Data: ?

21:59:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder HP CD-Writer+ 7200 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 682002432

21:59:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 840
Removed 2 run-out blocks from end of track 1.

21:59:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 332859 (332859) = #332859/73:58.9
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 332857 blocks [HP CD-Writer+ 7200 ]
--------------------------------------------------------------

21:59:14 #13 Phase 24 File dlgbrnst.cpp, Line 1571
Caching of files started

21:59:15 #14 Phase 25 File dlgbrnst.cpp, Line 1571
Caching of files completed

21:59:15 #15 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 1x (150 KB/s)

21:59:19 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

21:59:52 #17 SCSI -1015 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02EF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x19
0x00 0x0A 0x96 0x54 0x73 0x02

21:59:52 #18 MMC -1015 File Writer.cpp, Line 335
Calibration area full

21:59:52 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:59:59 #20 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

22:00:00 #21 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state

22:00:00 #22 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack

22:00:00 #23 SCSI -1023 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x19
0x00 0x0A 0x9A 0x53 0x2C 0x00

22:00:00 #24 MMC -1023 File WriterStatus.cpp, Line 227
Command sequence error

22:00:00 #25 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

22:00:00 #26 Text 0 File WriterStatus.cpp, Line 236
falling back to disc fixation

22:00:00 #27 SCSI -1023 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x19
0x00 0x0A 0x9A 0x55 0x2C 0x00

22:00:00 #28 MMC -1023 File WriterStatus.cpp, Line 227
Command sequence error

22:00:00 #29 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

22:00:00 #30 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 1x (150 KB/s)

22:00:00 #31 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.00c (967), size=17760 bytes, created 16.5.1996 9:00:00
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4.8.2004 7:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Jos tohon kukaan osais auttaa niin olisin kiitollinen...

 

Eikö kukaan...?

 

Kokeileppa testata jollain muulla poltto-ohjelmalla, jos vaikka sitten ihmeen kautta toimisi...

 

Ok.. ei toiminu ohjelman vaihtokaan. Kokeilin mm.Easy CD Creator. Onko kellään muulla ehdotusta?

 

Easy creator ja nero eivat ole missaan nimessa yhteen sopivia ohjelmia,, lue readme-file muistaakseni norosta. Takuu varmasti aiheuttaa pienia ongelmia koko koneeseen.