DVDRAM GSA-4082B

Tallaaja · 26.09.2004

Omistan tommoisen LG GSA-4082B aseman,niin tietäisikö kukaan mitkä 4x ja 8x levyt sillä saisi kunnolla poltettua.Olen kokeillut Princo DVD-R 4x ja Prodye DVD-R 8x enkä ole saannut niitä poltettua.Käytän poltto ohjelmana Neron uusinta versioo.

AfterDawn

migge77 · 29.09.2004

Ite olen poltellut samalla asemalla ritekin G04 levyjä eikä ole yksikään epäonnistunut (kohta 50 poltettu). Uusimman neron lisäksi muista päivittää aseman firmware uusimpaan versioon:

http://fi.lgservice.com/jsp/common/..._NAME_b1_a1=GSA-4082A207(EW).zip&FILE_GUBUN=B

Joudut leikkaamaan ja liimaamaan tuon osoitteen. Jostain syystä ei ota tuota loppua mukaan linkkiin. Jos tulee .htm(l) pääte, niin vaihda se .zip:iksi.

Ohjeet:

GSA-4082B Version A207 Firmware Update
To update the firmware of the GSA-4082B please refer to the following instructions:

Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.

This firmware update is for drives with original firmware versions below A206.
The drives must be original LG branded drives with the DVD Writer
model number GSA-4082B(no OEM units).

If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.

This firmware update is for use only on PC¡¯s with Windows XP, Windows 2000,
Windows Millennium Edition (ME), or Windows 98SE.

¡Ø Critical Instructions: (to be followed carefully)

1. Connect the drive as ¡°master¡± by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the ¡°master¡± position.
2. Download the file GSA-4082A207(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSA4082A207.EXE program,
which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.

5. Go into the folder with the update file and double click the GSA4082A207.EXE program
and click the ¡°update¡± button (red). Once the update is complete,
you will see ¡°Firmware Update Complete¡± and the button will become green
and advise you to reboot the system.

You will need to reboot your PC

The update will be complete, after you reboot your system.

WARNING:
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.

Laajenna...

Kirjaudu tai liity jäseneksi

DVDRAM GSA-4082B

Tallaaja Guest

migge77 Regular member

Jaa tämä sivu

Kirjaudu tai liity jäseneksi

DVDRAM GSA-4082B

Tallaaja Guest

migge77 Regular member

Jaa tämä sivu

Hyödyllisiä hakuja